ENVE - SES AR ONE-PIECE BAR - IN-ROUTE

Introduced on the US-Made ENVE Custom Road bike and made available to select custom frame builders around the globe, the SES AR (All-Road) One Piece bar/stem combo is now being offered for the first time on the aftermarket. As the flagship handlebar in ENVE's line-up, the SES AR One-Piece employs the IN-Route System for its internal routing. 

The SES AR One-Piece is compatible with the ENVE Melee, MOG, and a variety of custom-built frames featuring ENVE's IN-Route System.

Due to the handmade nature of this product, quantities are limited and may be subject to lead times.

BAR GEOMETRY

REACH: 76mm
DROP: 127mm
RISE: -7°
COMPOUND FLARE: 18° (5cm between hoods and drops)
WEIGHT: 330-360 grams (dependent on width and stem length)

SYSTEM COMPATIBILITY

This bar will seamlessly integrate with ENVE's frame models and some custom built frames whose builders have chosen ENVE's IN-Route System as their preferred method for hidden routing.

The IN-Route System runs the wires/cables and brake hoses through the bar/stem and down the front of the steerer-tube, and then into the fork and frame. If your non-ENVE, non-custom bike is routed in a similar manner, you may be able to utilize the SES AR One-Piece. Modifications to the customer's headset components may be required and will likely void the warranty.

WHAT'S IN THE BOX

• SES AR One-Piece Bar
• Hardware kit
• Shimano Junction Box Carrier
• Integrated Bar-End Plugs
• K-EDGE Computer Mount (Combo/Accessory Mount sold separately)
• Spacers (2 x 5mm, 3 x 10mm) + 1 x 10mm External Bypass Spacer