ENVE - SES AERO PRO ONE-PIECE BAR - IN-ROUTE

Introduced on the US-Made ENVE Custom Road bike and made available to select custom frame builders around the globe, the SES Aero Pro One-Piece bar/stem combo is now being offered for the first time on the aftermarket. As the flagship handlebar in ENVE's line-up, the SES Aero Pro One-Piece employs the IN-Route System for its internal routing. 

The SES Aero Pro One-Piece is compatible with the ENVE Melee, MOG, and a variety of custom-built frames featuring ENVE's IN-Route System.

Due to the handmade nature of this product, quantities are limited and may be subject to lead times.

“When it comes to performance, having a stiff but comfortable handlebar is really important. If you spend so many hours in the saddle like I do, then any contact point with the bike is key and little details make a big difference. I must say I'm really happy with what ENVE have produced for us both with their wheels and handlebars. They take on board feedback from us riders and deliver it into their products.”

– Tadej Pogacar

 

BAR GEOMETRY

REACH: 79mm
DROP: 129mm
RISE: -7°
DROP FLARE: 15mm per side (30mm total)
WEIGHT: 345-365 grams (dependent on width and stem length)

SYSTEM COMPATIBILITY

This bar will seamlessly integrate with ENVE's frame models and some custom built frames whose builders have chosen ENVE's IN-Route System as their preferred method for hidden routing.

The IN-Route System runs the wires/cables and brake hoses through the bar/stem and down the front of the steerer-tube, and then into the fork and frame. If your non-ENVE, non-custom bike is routed in a similar manner, you may be able to utilize the SES Aero Pro One-Piece. Modifications to the customer's headset components may be required and will likely void the warranty.

WHAT'S IN THE BOX

• SES Aero Pro One-Piece Handlebar
• Hardware Kit
• Integrated Bar-End Plugs
• K-EDGE Computer Mount
• 40mm Spacers (2 x 5mm) (3 x 10mm) (1 x 10mm External Bypass Spacer)