CeramicSpeed UFO Clean Bearings thoroughly removes grease and grime from within cartridge bearings. The unique properties efficiently breakdown grease and allow for simple cleansing of bottom brackets, wheel, headset, and pulley wheel bearings.
CERAMICSPEED - UFO CLEAN BEARINGS
CeramicSpeed UFO Clean Bearings thoroughly removes grease and grime from within cartridge bearings. The unique properties efficiently breakdown grease and allow for simple cleansing of bottom brackets, wheel, headset, and pulley wheel bearings.
This is a non-toxic and biodegradable formula - environmentally friendly and safe.
Please note the new updated bottle comes with a precision nozzle instead of a pipette for easier storage and shipping.
Read full instructions in the Technical Features tab above, or by clicking here.
CeramicSpeed is one of the world’s leading suppliers of ceramic bearings. The company consists of two specialised sales channels, focusing on cycling and industrial applications.
We have more than 15 years of experience in bearings applications, and we have developed close relationships with our component suppliers over the time – each of whom is the very best in their fields. The CeramicSpeed Sports channel delivers both bearings as well as ultrafast racing chains, reinforcing the company’s goal of saving watts and delivering the lowest friction available. All our bearings are handmade and our chains are optimised by hand in Denmark.
CERAMICSPEED - UFO CLEAN BEARINGS
To preserve the highest levels of efficiency and prolong the life of your CeramicSpeed bearings, preventative maintenance is required.
Depending on climate and normal riding conditions*, you may need to maintain your CeramicSpeed Bearings more often or select a different grease. The below recommendations are based on using CeramicSpeed All Round blue grease.
CeramicSpeed Bottom Brackets and Wheel Bearings should be maintained every 5,000-8,000 km or 3,000-5,000 miles and generally last 5 times longer compared to what you would experience with a standard bearing. CeramicSpeed headset bearings can be maintained once per year for most riders.
*Hot regions (average at or above 35°C/95°F), high humidity climates, riding in extremely sandy/desert like conditions or riding in constant rainy/wet conditions will result in more frequent maintenance needs. CeramicSpeed Long Life grease will also hold up for longer intervals in any of these conditions.
When possible, standard maintenance can and should be done without removing the bearings from their cup, frame bore, or hub shell. This will limit potential stress or impact damage from knocking out the bearings and reinstalling.
For cranks, remove the cranks, any spacers, and dust covers.
For hubs, follow the hub/wheel manufactures instructions for removing axle end caps and/or dust covers to access the face of the bearings.
With the face of the bearing visible, use a knife edge or flat pick to lift off the bearing seal starting on the inner lip (at the inner race) and carefully lifting up. Small, smooth movements will help prevent damaging the seal during removal. Once the seal is removed, wipe both sides clean, ensure it is completely flat, and set aside. You should now have access to the individual balls inside of the bearing. Using a cloth or shop rag, wipe away grease on the face of the bearing, revealing the balls. If you see a solid ring, you are looking at the back of the bearing. There is no direction to the performance of the bearing, but cleaning and maintenance are easier and more efficient when performed from the face/front of the bearing. You may choose to turn the bearing around at this time to allow adequate cleaning and ease of future maintenance.
To flush and clean CeramicSpeed bearings, UFO Clean Bearings was developed as a non-toxic easy to use bearing cleaner. Use the nozzle to add a few drops of cleaner into each bearing (Approx. 0.5 – 2.0mL dependent on the bearing size). Rotate the bearing to cause an ‘agitation’ effect inside the bearing.
After soaking for 3-5 minutes, use compressed air to flush out the grease and contamination. Repeat this process a second time if needed to fully clean the bearing. Once the bearing is visually cleaned out and rotates smoothly, allow the bearing to air dry prior to applying fresh grease. Follow grease selection and application guide at the bottom of this document for best performance and longevity. Once grease is applied, reinstall the face seal by laying it on the bearing (the all-rubber side should face out) and evenly pressing it into the groove on the outer race. The seal should sit flat and even on the bearing. Be sure to take careful note of the direction on any dust covers when reassembling the parts.